Show Interfaces Switchport - SMC Networks SMC6724L3 Management Manual

show interfaces switchport

Use this command to display the administrative and operational status of
the specified interfaces.
Syntax
show interfaces switchport [interface]
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 25.
Console#show interfaces switchport ethernet 1/25
Broadcast threshold: Enabled, 500 packets/second
Lacp status: Disabled
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan:
Forbidden Vlan:
Console#
- unit - This is device 1.
- port - Port number.
1(u),
I C
NTERFACE OMMANDS
4-131