Router Pim - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
Command
show ip pim interface Displays information about interfaces
show ip pim
neighbor

router pim

Use this command to enable Protocol-Independent Multicast - Dense
Mode (PIM-DM) globally for the router and to enter router configuration
mode. Use the no form to disable PIM-DM multicast routing.
Syntax
router pim
no router pim
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
This command enables PIM-DM globally for the router. You also need
to enable PIM-DM for each interface that will support multicast
routing using the ip pim dense-mode command (page 4-303), and
make any changes necessary to the multicast protocol parameters.
Example
Console(config)#router pim
Console#show router pim
Admin Status: Enabled
Console#
4-302
I
NTERFACE
Function
configured for PIM
Displays information about PIM neighbors NE,
Mode Page
NE, 4-309
PE
4-309
PE