Ip Igmp Snooping Query-Interval; Ip Igmp Snooping Query-Max-Response-Time - SMC Networks SMC6724L3 Management Manual

ip igmp snooping query-interval

Use this command to configure the query interval. Use the no form to
restore the default.
Syntax
ip igmp snooping query-interval seconds
no ip igmp snooping query-interval
seconds - The frequency at which the switch sends IGMP host-query
messages. (Range: 60-125)
Default Setting
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
Console(config)#ip igmp snooping query-interval 100
Console(config)#

ip igmp snooping query-max-response-time

Use this command to configure the query report delay. Use the no form of
this command to restore the default.
Syntax
ip igmp snooping query-max-response-time seconds
no ip igmp snooping query-max-response-time
seconds - The report delay advertised in IGMP queries. (Range: 5-30)
Default Setting
10 seconds
Command Mode
Global Configuration
M F
ULTICAST ILTERING
C
OMMANDS
4-203