Interface; Description - SMC Networks SMC6724L3 Management Manual

interface

Use this command to configure an interface type and enter interface
configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
Default Setting
None
Command Mode
Global Configuration
Example
To specify port 25, enter the following command:
Console(config)#interface ethernet 1/25
Console(config-if)#

description

Use this command to add a description to an interface. Use the no form to
remove the description.
Syntax
description string
no description
string - Comment or a description to help you remember what is
attached to this interface. (Range: 1-64 characters)
- unit - This is device 1.
- port - Port number.
I C
NTERFACE OMMANDS
4-119