Show Ip Dvmrp Interface; Pim-Dm Multicast Routing Commands - SMC Networks SMC6724L3 Management Manual

show ip dvmrp interface

Use this command to display the DVMRP configuration for interfaces
which have enabled DVMRP.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show ip dvmrp interface
Vlan 1 is up
DVMRP is enabled
Metric is 1
Console#

PIM-DM Multicast Routing Commands

Command
router pim
ip pim dense-mode
ip pim hello-interval Sets the interval between sending PIM hello
ip pim hello-holdtime Sets the time to wait for hello messages
ip pim
trigger-hello-interval
ip pim
join-prune-holdtime
ip pim
graft-retry-interval
ip pim
max-graft-retries
show router pim
Function
Enables PIM globally for the router
Enables PIM on the specified interface
messages
from a neighboring PIM router before
declaring it dead
Sets the maximum time before sending a
triggered PIM Hello message
Configures the hold time for the prune state IC
Configures the time to wait for a Graft
acknowledgement before resending a Graft
message
Configures the maximum number of times
to resend a Graft message if it has not been
acknowledged
Displays the global PIM configuration
settings
M R
ULTICAST OUTING
C
OMMANDS
Mode Page
GC 4-302
IC 4-303
IC 4-304
IC 4-305
IC 4-305
4-306
IC 4-307
IC 4-308
NE, 4-308
PE
4-301