Downloading Configuration Settings From A Server - SMC Networks SMC6724L3 Management Manual

Tigerswitch 10/100 24-port layer 3 switch

Hide thumbs Also See for SMC6724L3:

Table of Contents

ONFIGURING THE

31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9, ".",

Note: The maximum number of user-defined configuration files is limited

only by available flash memory space.

Downloading Configuration Settings from a Server

You can download the configuration file under a new file name and then

set it as the startup file, or you can specify the current startup

configuration file as the destination file to directly replace it. Note that the

file "Factory_Default_Config.cfg" can be copied to the TFTP server, but

cannot be used as the destination on the switch.

Web – Click System, Configuration. Enter the IP address of the TFTP

server, enter the name of the file to download, select a file on the switch to

overwrite or specify a new file name, and then click Transfer from Server.

If you download to a new file name, then select the new file from the

drop-down box for Startup Configuration File, and press Apply Changes.

To use the new settings, reboot the system via the System/Reset menu.

Do you have a question about the SMC6724L3 and is the answer not in the manual?