Configuring Vlan Interfaces - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
• no vlan vlan-id deletes the VLAN.
• no vlan vlan-id name removes the VLAN name.
• no vlan vlan-id state returns the VLAN to the default state (i.e., active).
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name
RD5. The VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Related Commands
show vlan (4-172)

Configuring VLAN Interfaces

Command
interface vlan
switchport mode
switchport
acceptable-frame-
types
switchport
ingress-filtering
switchport native
vlan
4-164
I
NTERFACE
Function
Enters interface configuration mode for a
specified VLAN
Configures VLAN membership mode for
an interface
Configures frame types to be accepted by an
interface
Enables ingress filtering on an interface
Configures the PVID (native VLAN) of an
interface
Mode Page
IC 4-165
IC 4-166
IC 4-167
IC 4-168
IC 4-169