Ip Routing; Overview - SMC Networks SMC6724L3 Management Manual

• V1 Timer – The time remaining until the switch assumes that there are
no longer any IGMP Version 1 members on the IP subnet attached to
this interface. (Default: 400 seconds)
- If the switch receives an IGMP Version 1 Membership Report, it sets
a timer to note that there are Version 1 hosts present which are
members of the group for which it heard the report.
- If there are Version 1 hosts present for a particular group, the switch
will ignore any Leave Group messages that it receives for that group.
Web – Click IP, IGMP, IGMP Group Information.
CLI – The following shows the IGMP groups currently active on
VLAN 1.
Console#show ip igmp groups vlan 1
GroupAddress
--------------- --------------- --------------- -------- -------- ---------
234.5.6.8
Console#

IP Routing

Overview

This switch supports IP routing and routing path management via static
routing definitions (page 3-172) and dynamic routing such as RIP
(page 3-175) or OSPF (page 3-186). When IP routing is enabled (page
3-176), this switch acts as a wire-speed router, passing traffic between
VLANs using different IP interfaces, and routing traffic to external IP
InterfaceVlan Lastreporter
1
Uptime
10.1.5.19 7068
IP R
OUTING
4-213
Expire V1Timer
220 0
3-149