Ip Igmp; No Ip Igmp - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE

ip igmp

Use this command to enable IGMP on a VLAN interface. Use the no
form of this command to disable IGMP on the specified interface.
Syntax
ip igmp

no ip igmp

Default Setting
Disabled
Command Mode
Interface Configuration (VLAN)
Command Usage
IGMP query can be enabled globally at Layer 2 via the ip igmp
snooping command, or enabled for specific VLAN interfaces at Layer
3 via the ip igmp command. (Layer 2 query is disabled if Layer 3 query
is enabled.)
Example
Console(config)#interface vlan 1
Console(config-if)#ip igmp
Console(config-if)#end
Console#show ip igmp interface
Vlan 1 is up
IGMP is enable, version is 2
Robustness variable is 2
Query interval is 125 sec
Query Max Response Time is 10 sec,
Last Member Query Interval is 1 sec
Querier is 10.1.0.253
Console#
Related Commands
ip igmp snooping (4-197)
show ip igmp snooping (4-199)
4-206
I
NTERFACE