Configuring Vlan Interfaces; Table 4-51 Configuring Vlan Interfaces - SMC Networks 8748L2 Management Manual

Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
• no vlan vlan-id deletes the VLAN.
• no vlan vlan-id name removes the VLAN name.
• no vlan vlan-id state returns the VLAN to the default state
(i.e., active).
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name
RD5. The VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Related Commands
show vlan (4 -193)

Configuring VLAN Interfaces

Command
interface vlan
switchport mode
switchport
acceptable-frame-types
switchport
ingress-filtering

Table 4-51 Configuring VLAN Interfaces

Function
Enters interface configuration mode for
a specified VLAN
Configures VLAN membership mode
for an interface
Configures frame types to be accepted
by an interface
Enables ingress filtering on an interface IC
VLAN C
OMMANDS
Mode Page
IC 4-186
IC 4-187
IC 4-188
4-189
4-185