C
L
OMMAND
INE
Configuring VLAN Interfaces
Command
interface vlan
switchport mode
switchport
acceptable-frame-types
switchport
ingress-filtering
switchport native vlan
switchport allowed vlan Configures the VLANs associated with an
switchport gvrp
switchport forbidden
vlan
switchport priority
default
interface vlan
Use this command to enter interface configuration mode for VLANs, and
configure a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
4-230
I
NTERFACE
Table 4-56 Configuring VLAN Interfaces
Function
Enters interface configuration mode for a
specified VLAN
Configures VLAN membership mode for
an interface
Configures frame types to be accepted by an
interface
Enables ingress filtering on an interface
Configures the PVID (native VLAN) of an
interface
interface
Enables GVRP for an interface
Configures forbidden VLANs for an
interface
Sets a port priority for incoming untagged
frames
Mode Page
IC
4-230
IC
4-231
IC
4-232
IC
4-233
IC
4-234
IC
4-235
IC
4-241
IC
4-236
IC
4-246