Configuring Vlan Interfaces; Interface Vlan; Table 4-57 Configuring Vlan Interfaces - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE
Related Commands
show vlan (4-239)

Configuring VLAN Interfaces

Command

interface vlan

switchport mode
switchport
acceptable-frame-types
switchport
ingress-filtering
switchport native vlan Configures the PVID (native VLAN) of
switchport allowed
vlan
switchport gvrp
switchport forbidden
vlan
switchport priority
default
interface vlan
This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
4-232
I
NTERFACE

Table 4-57 Configuring VLAN Interfaces

Function
Enters interface configuration mode for
a specified VLAN
Configures VLAN membership mode
for an interface
Configures frame types to be accepted
by an interface
Enables ingress filtering on an interface IC
an interface
Configures the VLANs associated with
an interface
Enables GVRP for an interface
Configures forbidden VLANs for an
interface
Sets a port priority for incoming
untagged frames
Mode Page
IC 4-232
IC 4-233
IC 4-234
4-235
IC 4-236
IC 4-237
IC 4-249
IC 4-238
IC 4-254