Trigger:sp[1-1]:Source; Trigger:tr[1-1]:Narrow:video:frequency:center - Agilent Technologies E5052A Programmer's Manual

EXTernal
MANual
BUS
Equivalent key
PN Menu -> Trigger -> Source

:TRIGger:SP[1-1]:SOURce

Syntax :TRIGger:SP[1-1]:SOURce {INTernal|EXTernal|MANual|BUS}
:TRIGger:SP[1-1]:SOURce?
Description Selects trigger source
Parameter
INTernal(Preset
value)
EXTernal
MANual
BUS
Equivalent key
SP Menu -> Trigger -> Source

:TRIGger:TR[1-1]:NARRow:VIDeo:FREQuency:CENTer

Syntax
:TRIGger:TR[1-1]:NARRow:VIDeo:FREQuency:CENTer <numeric>
:TRIGger:TR[1-1]:NARRow:VIDeo:FREQuency:CENTer?
Description
Sets/Reads the video trigger frequency value for narrowband mode in the transient
measurement
Parameter
When the E5052A is used stand-alone, or with the downconverter turned off
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, the conversion mode used in the
frequency offset, the target frequency and frequency range of the narrow band mode)
Range
Preset value
Unit
7
Description
Set trigger source to 'EXTernal'
Set trigger source to 'MANual'
Set trigger source to 'BUS'
Description
Set trigger source to 'INTernal'
Set trigger source to 'EXTernal'
Set trigger source to 'MANual'
Set trigger source to 'BUS'
<Numeric>
9.2M to 117.0128G
1G
Hz
SCPI Command Reference
:TRIGger:SP[1-1]:SOURce
373