Replacing Status Light Pipe
When required
Tools required
Parts required
Preparations for this procedure:
•
Remove the front cover and top cover, see
the Covers"
on page 144.
2 Replace the top cover, see
3 Replace the detector into the stack and reconnect the cables and capillaries.
4 Turn on the detector.
1100 Series FD Reference Manual
If part was broken or removed
Screwdriver POZI 1 PT3
Status light pipe 5041-8384
"Removing
"Replacing the Foams and Covers"
Repairing the Fluorescence Detector
1 The status light pipe is clipped into the top cover.
on page 196.
5
193