Agilent Technologies 1100 Series Reference Manual page 190

5
Repairing the Fluorescence Detector
5 Insert the power supply into its location and fix it with the
screws at the rear panel.
7 Reinstall bottom foam piece. Slide it in underneath the
leak drain.
192
6 Press down and clip in the power switch light pipe into the
power supply.
Power
switch light
pipe
8 Reinstall the processor board, see
Processor Board" on page 159.
9 Reinstall the fan assembly, see
page 163.
10 Reinstall the optical unit, see
Unit" on page 194.
11 Reinstall the front cover, top cover, see
Foams and Covers" on page 196.
12 Replace detector into the stack.
13 Reconnect the power cable and turn on the detector.
1100 Series FD Reference Manual
"Exchanging the
"Exchanging the Fan" on
"Installing the Optical
"Replacing the