Agilent Technologies 1100 Series Reference Manual page 104

4
Troubleshooting and Test Functions
Figure 35
Using the Control Module
1 Create the methods WLEMTEST and WLEXTEST as listed
2 Copy the methods to your PC card and re-boot the control module.
3 On the Analysis screen press the Method button and copy the methods into
Figure 36
4 Load the method WLEXTEST. The FLD will change into the multi-emission
106
Excitation Spectrum
page 109.
the module.
Copying Methods into the FLD
mode and scan in the range of the expected maximum of 397 nm
Table 20
±
1100 Series FD Reference Manual
on
20 nm.