Installing The Optical Unit - Agilent Technologies 1100 Series Reference Manual

5
Repairing the Fluorescence Detector

Installing the Optical Unit

When required
Tools required
For safe operation make sure that the ground cable is reconnected.
WA RN ING
Preparations for this procedure:
• All previous work has been completed.
• Power supply has been installed.
• Fan has been installed.
• The optical unit has its foam cover attached.
194
When all repairs on the optical unit have been completed
Screwdriver POZI 1 PT3
Hexagonal key, 4 mm
1 Place the optical unit in the instrument. Reconnect the
grounding screw.
Screw
1100 Series FD Reference Manual
J3