Interfaces - Agilent Technologies 1100 Series Reference Manual

Interfaces

The Agilent 1100 Series modules provide the following interfaces:
Table 60 Agilent 1100 Series Interfaces
Interface Type Pumps
CAN Yes
GPIB Yes
RS-232C Yes
Remote Yes
Analog Yes
Interface board Yes
* The vacuum degasser will have a special connector for specific use. For details see description of main board.
• CAN connectors as interface to other Agilent 1100 Series modules,
• GPIB connector as interface to the Agilent ChemStation,
• RS-232C as interface to a computer,
• REMOTE connector as interface to other Agilent products,
• Analog Output connector(s) for signal output, and
• Interface slot for specific interfacing (external contacts, BCD, LAN and so
For identification and location of the connectors
Never use cables other than the ones supplied by Agilent Technologies to ensure
WA RN ING
proper functionality and compliance with safety or EMC regulations, see
Overview"
1100 Series FD Reference Manual
Autosampler DA Detector
MW Detector
FL Detector
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No 2 ×
Yes Yes
on).
on page 218.
Theory of Operation
VW Detector Thermostatted
RI Detector Column
Compartment
Yes Yes
Yes Yes
Yes Yes
Yes Yes
1 × No
Yes No
Figure 6
8
Vacuum
Degasser
No
No
No
Yes
*
Yes
No
on page 23.
"Cable
285