Communication Settings For Rs-232C Communication - Agilent Technologies 1100 Series Reference Manual

8
Theory of Operation

Communication Settings for RS-232C Communication

The communication protocol used in this instrument supports only hardware
handshake (CTS/RTS).
Switches 1 in down and 2 in up position define that the RS-232C parameters
will be changed. Once the change has been completed, the instrument must be
powered up again in order to store the values in the non-volatile memory.
Table 66
Use the following tables for selecting the setting which you want to use for
RS-232C communication. The number 0 means that the switch is down and 1
means that the switch is up.
Table 67
Table 68
292
Communication Settings for RS-232C Communication
Mode Select 1
RS-232C 0
Baud Rate Settings
Switches
3 4 5
0 0 0
0 0 1
0 1 0
0 1 1
Data Bit Settings
Switch 6 Data Word Size
0 7 Bit Communication
1 8 Bit Communication
2 3 4
1 Baud rate
Baud Rate Switches
3
9600 1
1200 1
2400 1
4800 1
5 6 7
Data Parity
Bits
Baud Rate
4 5
0 0 9600
0 1 14400
1 0 19200
1 1 38400
1100 Series FD Reference Manual
8