Replacing Leak Handling System Parts - Agilent Technologies 1100 Series Reference Manual

Replacing Leak Handling System Parts

When required
Tools required
Parts required
1 Remove the front cover.
2 Pull the leak funnel out of the leak funnel holder.
3 Pull out the leak funnel with the tubing.
4 Insert the leak funnel with the tubing in its position.
5 Insert the leak funnel into the leak funnel holder.
6 Replace the front cover.
Leak funnel
Leak funnel holder
Leak tubing
Figure 57
1100 Series FD Reference Manual
If the parts are corroded or broken
None
Leak funnel 5061-3356
Leak funnel holder 5041-8389
Leak tubing (120 mm) 0890-1711
Replacing Leak Handling System Parts
Repairing the Fluorescence Detector
Leak sensor
5
141