5
Repairing the Fluorescence Detector
Replacing the EM-Condenser or Cutoff-Filter
When required
Tools required
Parts required
Preparations for this procedure:
•
Turn off the detector.
•
Disconnect the power cable.
•
Remove the flow cell.
•
Remove detector from stack and place it on the
workbench.
•
Remove the covers as described in
Covers"
on page 144.
•
Remove the flow cell.
168
If light throughput is too low
Screwdriver POZI 1 PT3
Hexagonal key 2.5 mm
Condenser assembly EM 1000-1124
Cutoff filter 295 nm 5062-8530
1
"Removing the
EM
EX
Disconnect the emission and the excitation cables and
from the detector main board.
A
A
A
B
1100 Series FD Reference Manual
B