Time-Out - Agilent Technologies 1100 Series Reference Manual

4
Troubleshooting and Test Functions

Time-out

The time-out threshold was exceeded (set in sequence parameter on the
Agilent ChemStation or Configure-LC system).
Probable Causes
• The analysis was completed successfully, and the time-out function
• A not-ready state was present during a sequence or multiple-injection run
Suggested Actions
78
switched off the pump as requested.
for a period longer than the time-out threshold.
Check the logbook for the occurrence and source of a not-ready condition.
Restart the analysis where required.
1100 Series FD Reference Manual