Agilent Technologies 1100 Series Reference Manual page 173

10
Replace the front foam.
1100 Series FD Reference Manual
Repairing the Fluorescence Detector
Next Steps:
•
Replace the covers as described in
Foams and Covers" on page 196.
•
Re-install the flow cell and the front panel
•
Re-install the detector in the stack.
•
Turn the lamp on.
•
Perform a wavelength verification to check the correct
positioning of the replaced assemblies, as described in
chapter "Wavelength Verification and Calibration"
page 101.
5
"Replacing the
on
175