Agilent Technologies 1100 Series Reference Manual page 33

2 Set the FLD setpoints according to
In this example
additional excitation
wavelengths (B, C,
D) are used. This will
increase the scan
time and may lower
the performance.
Figure 7
3 Start the run.
4 The resulting chromatograms are shown in
Figure 8
5 The excitation maxima is around 250 nm.
1100 Series FD Reference Manual
this information is split across separate screens).
FLD Parameters
Biphenyl peak with different excitation wavelengths
First Steps with the Fluorescence Detector
Figure 7 (on the local control module
Figure
Ex=246 nm
Ex=230 nm
8:
Ex=250 nm
Biphenyl peak
Ex=290 nm
2
35