Agilent Technologies 1100 Series Reference Manual page 183

Fluorescence detector

Hide thumbs Also See for 1100 Series:

Table of Contents

6 Carefully pull off the ferret from the wires and keep it in a

safe place. Then pull out the FLL board.

8 Put the wires into the released contacts using the

Order of wires (left to right):

1100 Series FD Reference Manual

7 Insert the new FLL board. Fit the wires through the holes

and the Ferret.

9 Reinstall the lamp as described in

Repairing the Fluorescence Detector

on page 147.

"Exchanging the

Show Quick Links

Table of Contents