5
Repairing the Fluorescence Detector
2 Using the 4 mm hexagonal key, unscrew the five screws
and lift the cover.
A
A
A
B
4 Remove the lamp as described in
Lamp"
on page 147.
B
184
B
"Exchanging the
A
3 Using the 2.5 mm hexagonal key, unscrew the two screws
and remove the pad (A).
5 Disconnect the wires from the connector. Use a flat screw
driver to release the wires.
FLL Board
1100 Series FD Reference Manual
A