Removing The Covers - Agilent Technologies 1100 Series Reference Manual

5
Repairing the Fluorescence Detector

Removing the Covers

When required
Tools required
Parts required
There will be a risk of damaging hardware due to overheating when operating the
CAU TI O N
instrument without covers.
Preparations for this procedure:
•
Turn off the detector.
•
Disconnect the power cable.
•
Remove the flow cell.
•
Remove detector from stack and place it on the
workbench.
144
For all repairs inside the detector
Screwdriver POZI 1 PT3
Depends on the work inside and the following procedures
1
Press the release buttons and remove the front cover.
Unclip and remove the waste funnel assemly.
1100 Series FD Reference Manual