Analog Signal Output; Gpib Interface; Can Interface - Agilent Technologies 1100 Series Reference Manual

8
Theory of Operation

Analog Signal Output

The analog signal output can be distributed to a recording device. For details
refer to the description of the module's main board.

GPIB Interface

The GPIB connector is used to connect the module with a computer. The
address and control switches next to the GPIB connector determine the
GPIB address of your module. The switches are preset to a default address and
recognized by the operating software from Agilent Technologies.
Table 61

CAN Interface

The CAN is an intermodule communication interface. It is a 2-wire serial bus
system supporting high speed data communication and real-time requirement.
286
Default Addresses
Autosampler
Pump
FLD
VWD
Agilent 8453A
DAD / MWD
Column Compartment
28 Autosampler
22 RID
23
24 Autosampler (HP 1050)
25 Pump (HP 1050)
26 VWD (HP 1050)
27 DAD (HP 1050)
28
29
18
16
10
17
1100 Series FD Reference Manual