Agilent Technologies 1100 Series Reference Manual page 195

3
Slide the top plate towards the rear and fix the top plate
screws.
Ensure correct
fit with Z-plane
5
If required, insert the interface board and fix the screws.
Next Steps:
•
Replace the detector into the stack and Reinstall the flow cell.
•
Reconnect the power cable and turn on the detector.
•
Turn the lamp on.
1100 Series FD Reference Manual
Repairing the Fluorescence Detector
4
Replace the cover.
6
Replace the waste funnel assmbly and the front panel.
5
197