Optical Unit Assembly - Agilent Technologies 1100 Series Reference Manual

6
Identifying Parts and Materials

Optical Unit Assembly

Table 25

Optical Unit Assembly

Item Description
Optical unit (exchange assembly), comes with foam part and CableFLM/FLF
1 Flash Lamp Board (FLL), includes trigger pack
2 Xenon flash lamp
3 Condenser Excitation
4 Slit (EX) 2x4
5 Mirror
6 Excitation Monochromator assembly (complete)
7 Emission Monochromator assembly (complete)
8 Standard Flow Cell, 8 µl, 20 bar,
inlet i.d./length 0.17 mm/80 mm, outlet i.d./length 0.25 mm/80 mm
Cuvette, 8 µl, 20 bar
inlet i.d./length 0.5 mm/80 mm, outlet i.d./length 0.5 mm/80 mm
Screw for flow cell / cuvette
9 Slit (EM) 2x8
10 Photomuliplier tube assembly (PMT), see also
11 Condenser Emission
12 Front-end Board (FLF), underneath the optical (exchange assembly) (requires firmware
revision A.04.06 or above)
12a Reference Diode Board (FLR)
12b Diffuser plate (in front of the reference diode board FLR)
13 Cutoff Filter 295 nm, for other type see
14 Carbon filter mat
15 Cable FLM - FLF board (comes with optical unit)
204
page 180 for additional information
page 215
Part Number
G1321-69002
G1321-66512
2140-0600
1000-1136
G1321-08103
1000-1000
G1321-60003
G1321-60004
G1321-60005
G1321-60007
G1321-22400
G1321-08102
1970-0201
1000-1124
G1321-69531
G1321-66533
1000-1121
5062-8530
01046-42701
G1321-61600
1100 Series FD Reference Manual