Show Clock - Dell PowerEdge M I/O Aggregator Reference Manual

Related

show clock

Commands
show clock
Displays the current clock settings.
Syntax show clock [detail]
Parameters
detail
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.17.0
History
Example Figure 23-3. show clock Command Example
FTOS#show clock
12:30:04.402 pacific Tue May 22 2012
FTOS#
Example Figure 23-4. show clock detail Command Example
FTOS#show clock detail
12:30:26.892 pacific Tue May 22 2012
Time source is RTC hardware
Summer time starts 00:00:00 UTC Wed Mar 14 2012
Summer time ends 00:00:00 pacific Wed Nov 7 2012
FTOS#
Related
clock summer-time recurring
Commands
show calendar
clock read-calendar
Set the software clock on the switch from the information set in hardware clock (calendar).
Syntax clock read-calendar
Defaults
Not configured.
Command Modes EXEC Privilege
Command
Version 8.3.17.0
History
Usage
In the switch, the hardware clock is separate from the software and is called the calendar. This
Information
hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS
automatically updates the software clock after system bootup.
Displays the time and date from the switch software clock.
(OPTIONAL) Enter the keyword
Supported on M I/O Aggregator
Displays the time and date from the switch hardware clock.
Displays the time and date from the switch hardware clock.
Supported on M I/O Aggregator
detail
to view the source information of the clock.
System Time | 231