Controller Fan (Pl14.1.2) Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.17.2 CONTROLLER FAN (PL14.1.2) Removal

1. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)
2. Remove the RIGHT COVER ASSY. (See Section 3.2.5.11.)
3. Disconnect the CONTROLLER FAN connector (P/J1).
4. Remove the 2 screws (gold, 20mm) securing the CONTROLLER FAN, and
remove the CONTROLLER FAN.
C H E C K
Be careful not to pinch the harness when mounting.
P O I N T
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Figure 3-127. CONTROLLER FAN Removal
Revision C
3-109