Epson AcuLaser C8500 Service Manual page 27

EPSON AcuLaser C8500
Special paper: See Table 1-6
Paper
8.5 x 11"
OHP Sheet
(210 x 297mm)
Post Card 100 x 148 mm
37/8" x 71/2"
MON
(98.43 x 190.54 m m )
41/8 x 91/2
C10
(104.78 x 241.3 m m )
DL 110 x 220 mm
C6 114 x 162
*1: LEF: Long Edge Feed, SEF: Short Edge Feed
*2: 2UP is available only for paper size of LT(LEF) or smaller. For custom size paper, paper length along the loading direction must be 210
mm (8.5 inch) or shorter. As for envelopes, the total length with its flap opened must be 8.5 inch or shorter.
*3: To feed envelope, open the flap and set it to the rear end.
Paper aligning
Single side aligning (front side) for all sizes (both standard tray (MSI) and each
cassette)
Consumables
TONER CARTRIDGE (Black, Cyan, Magenta, Yellow)
DRUM CARTRIDGE (including one WASTE TONER BOX)
WASTE TONER BOX
PRODUCT DESCRIPTIONS
Table 1-6. Paper Size/2-UP Mode Availability
Paper setting orientation
Standard
Size
Universal
MSI
LEF
SEF
*3
LEF
*3
LEF
*3
LEF
*3
LEF
Specifications
*1
Option
500-Sheet/ A3W
cassette LCP Unit cassette
− − −
− − −
− − −
− − −
− − −
− − −
REGULARLY REPLACED PARTS
MAIN FUSER ASSEMBLY (including an air filter)
PAPER OUTPUT
Face-down (FD):
250 sheets* (B5/EXE or larger, up to 105g/m
Face-up (FU):
150 sheets* (A4 or smaller)
50 sheets* (larger than A4)
*: Applicable to the both single and duplex prints. (when recommended
paper is used)
2UP mode Duplex print
*2
availability availability
Available Unavailable
Available Unavailable
Available Unavailable
Available Unavailable
Available Unavailable
Available Unavailable
2
(28lb))
Revision C
1-7