Epson AcuLaser C8500 Service Manual page 267

EPSON AcuLaser C8500
9. Lift with your hand the lever of the ROTARY LATCH ASSY which prevents
the Developer Assy from turning, and turn the ROTARY FRAME ASSY as
slowly as possible 360( clockwise).
Figure 3-133. Confirmation Procedure - 3
Disassembly/Assembly/Adjustment
10. Make sure the amount of position change with the mark made in step 7 of
this procedure are 3 - 5mm.
NOTE: If outside the standard, adjust the right value by the gap adjustment
plate of the Magnet Roll following procedure.
Figure 3-134. Confirmation Procedure - 4
Adjustment
Revision C
3-115