P/S Fan Removal - Epson Stylus Pro 10000 Service Manual
Large format color inkjet printer
Hide thumbs
Also See for Stylus Pro 10000:
- User manual (174 pages) ,
- Printer manual (168 pages) ,
- Product support bulletin (104 pages)
Table of Contents
Advertisement
EPSON Stylus Pro 10000/10000CF/10600
4.3.2.6 P/S Fan Removal
1.
Remove the Rear Cover as described in 4.3.1.7 "Rear Cover Removal".
2.
Disconnect the P/S Fan Cable connector that is connected to C362DRV Board
CN41 and release the cable clamp.
Cable Clump
Figure 4-55.
3.
Remove one screw securing the earth plate connected to CN42 on the C362MAIN
board, and disconnect fan cable connector.
Auto take-up roller connector
Figure 4-56.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
4.
Remove one screw securing the P/S Fan Holder, then remove it.
P/S Fan Holder
Cable Connector
5.
Remove two screws securing the P/S Fan on the P/S Fan Holder, and remove it.
Connector
Screw
Thank You For Using TheServiceManualShop.com
Disassembly
One screw securing the P/S Fan Holder
Figure 4-57.
Fan screws
Figure 4-58. AC Inlet Removal
Revision D
P/S Fan Holder
140
Advertisement
Table of Contents
Troubleshooting
