Support Menu; Toner Transfer Menu - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500
COLOR PAGES
Indicates the total number of color-printing sheets that the printer has printed.
(Display only) Once the counter reaches 99999999, it does not add any more.
Note the printer shows the value counted on the controller side.
Value range: 0 to 99999999 (in sheet unit)
B/W PAGES
Indicates the total number of B/W-printing sheets that the printer has printed.
(Display only) Since the value is "Total Pages - Color Pages", if the total pages
exceeds 99999999, the correct value will not be indicated.
Value range: 0 to 99999999 (in sheet unit)
SELECTYPE INIT
Clears the panel setting values to the factory setting values. The following
counters are not reset; page counter, C/M/Y/K toner counter, 2nd BTR counter,
IBT Cleaner counter, Fuser Unit counter, the printer 1/printer 2 counters that
are on the engine side, and the settings for "Parallel Menu", "Network Menu",
and "AUX Menu".

1.6.3.5 Support Menu

The setting menue is displayed, and selection enabled , only when the Support
Mode has been activated by hidden operation when the power is turned on.
After that, if the power is turned off, then truned on again, the Support Menu is
delected form the Menue. (Support Mode deleted = the printer has switched to
the normal mode.
HDD FORMAT
HDD initialization is executed, HDD initialization takes much time and the
initializtion progress is displayed as "HDD Format***%"(in each 1%). Roboot is
ececuted after the initialization completes. Any interfaces cannot be connected
at this time.
PRODUCT DESCRIPTIONS

1.6.3.6 Toner Transfer Menu

The setting menue is displayed, and selection enabled, only when the Support
Mode has been activated by hidden operation when the power is turned on.
After that, if the power is turned off, then truned on again, the Toner Transfer
Menu is delected form the Menu. (Support Mode deleted = the printer has
switched to the normal mode.
NORMAL
Specify the Offset value of the 2nd BTR transfer voltage for the Plain Paper 1.
This setting becomes valid after the power turned off and on again.
THICK
Specify the Offset value of the 2nd BTR transfer voltage for the Cover. This
setting becomes valid after the power turned off and on again.
TRANSPARENCY
Specify the Offset value of the 2nd BTR transfer voltage for the Transparency.
This setting becomes valid after the power turned off and on again.
COATED
Specify the Offset value of the 2nd BTR transfer voltage for the Coated. This
setting becomes valid after the power turned off and on again.
THICK NARROW
Specify the Offset value of the 2nd BTR transfer voltage for the Coated. This
setting becomes valid after the power turned off and on again.
ENVELOPE
Specify the Offset value of the 2nd BTR transfer voltage for the Envelope. This
setting becomes valid after the power turned off and on again.
Panel Setting
Revision C
1-48