EPSON AcuLaser C8500
3.2.16 Electrical
3.2.16.1 LVPS (PL13.1.1) Removal
1. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
2. Remove the 4 connectors (P/J32, P/J33, P/J34, P/J35) of the LVPS.
3. Remove 2 of the 4 screws (silver, w/collar, 6 mm) securing the LVPS, and
loosen the remaining 2 screws (silver, w/collar, 8mm).
4. Lift the LVPS, unhook the left hook, and remove the LVPS.
Disassembly/Assembly/Adjustment
C H E C K
P O I N T
Figure 3-118. LVPS Removal
Disassembly/Assembly Procedures
Be careful not to get the harness caught in the gears or
on sheet metal when mounting.
Be sure to hook the left hook securely on the frame when
mounting.
Revision C
3-100