Epson AcuLaser C8500 Service Manual page 363
Color laser page printer
Hide thumbs
Also See for AcuLaser C8500:
- Quick reference manual (21 pages) ,
- Unpacking manual (20 pages) ,
- Setup manual (84 pages)
Table of Contents
Advertisement
EPSON AcuLaser C8500
Replace Photocondctr
LED:
On Line = off
Continue = off
Explanation:
The engine has detected that the photoconductor has
expired. Printing stopped.
Solution:
Open the front cover, replace the photoconductor unit with a
new one, and close the cover. Then turn the printer off and
back on.
Replace Waste T Box
LED:
On Line = off
Continue = off
Explanation:
The engine has detected that the Waste Toner Box is full.
Printing stopped.
Solution:
Open the front cover, replace the Waste Toner Box with a new
one, and close the cover to clear the error.
Front Cover Open
LED:
On Line = off
Continue = off
Explanation
The front cover is open.
Solution:
Close the cover to clear the error.
Exit Cover Open
LED:
On Line = off
Continue = off
Explanation:
The exit cover is open.
Solution:
Close the cover to clear the error.
Troubleshooting
Cover A Open
LED:
On Line = off Continue = off
Explanation:
The Cover A (Paper Exit Cover) is open.
Solution:
Close the Cover A. The error will be automatically cleared.
Cover D Open
LED:
On Line = off Continue = off
Explanation:
The Cover D (Right Cover) is open.
Solution:
Close the Cover D. The error will be automatically cleared.
Unit G Open
LED:
On Line = off Continue = off
Explanation:
The Unit G (Duplex Tray) is open.
Solution:
Close the Unit G. The error will be automatically cleared.
Unit C Open
LED:
On Line = off Continue = off
Explanation:
The Unit C (Paper Feed Unit) is open.
Solution:
Close the Unit C. The error will be automatically cleared.
Unit B Open
LED:
On Line = off Continue = off
Explanation:
The Unit B (Fusing Unit) is open.
Solution:
Close the Unit B. The error will be automatically cleared.
Overview
Revision C
5-11
Advertisement
Table of Contents
Troubleshooting
