EPSON AcuLaser C8500
3.2.16.7 FRONT COVER SWITCH L (PL13.2.4) Removal
1. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)
2. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
3. Remove the TENSION LEVER. (See Section 3.2.11.1.)
4. Remove the INNER COVER ASSY. (See Section 3.2.5.5/Section 3.2.5.6/
Section 3.2.5.7.)
5. Disconnect the connector (P/J197) of FRONT COVER SWITCH L, and
free the harness by unhooking it.
6. Remove the screw (silver, w/collar, 6mm) securing FRONT COVER
SWITCH L, remove the harness from the hole in the frame, and remove
FRONT COVER SWITCH L.
C H E C K
Run the harness correctly when mounting FRONT COVER
P O I N T
SWITCH L.
Disassembly/Assembly/Adjustment
Disassembly/Assembly Procedures
Figure 3-124. FRONT COVER SWITCH L Removal
Revision C
3-105