EPSON AcuLaser C8500
3.2.16.6 FRONT COVER SWITCH R (PL13.2.3) Removal
1. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)
2. Remove the RIGHT COVER ASSY. (See Section 3.2.5.11.)
3. Remove the CONTROLLER PWB. (See Section 3.2.17.1.)
4. Remove the CONT. CHASSIS ASSY. (See Section 3.2.17.3.)
5. Disconnect the 4 connectors (P/J191, P/J192, P/J193, P/J194) of FRONT
COVER SWITCH R. Unhook FRONT COVER SWITCH R from the frame,
push forward, and remove.
C H E C K
Mount the FRONT COVER SWITCH R securely.
P O I N T
Disassembly/Assembly/Adjustment
Disassembly/Assembly Procedures
Figure 3-123. FRONT COVER SWITCH R Removal
Revision C
3-104