EPSON AcuLaser C8500
3.2.16.3 TOP COVER SWITCH (PL13.1.3) Removal
1. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)
2. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
3. Disconnect the connector (P/J195) of the TOP COVER SWITCH.
4. Remove the screw (black, w/collar, 6mm) securing the TOP COVER
SWITCH, and remove the TOP COVER SWITCH.
Figure 3-120. TOP COVER SWITCH
Disassembly/Assembly/Adjustment
3.2.16.4 DEVE. FAN (PL13.1.5) Removal
1. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
2. Remove the DEVE. FAN connector (P/J82), and free the harness by
removing from the FAN DUCT.
3. Spread the FAN DUCT hook securing the DEVE. FAN, and remove the
DEVE. FAN.
C H E C K
P O I N T
Disassembly/Assembly Procedures
Figure 3-121. DEVE. FAN Removal
Mount so that the manufacturer's label on the surface of
the DEVE. FAN faces outside.
Attach the harness securely when mounting.
Revision C
3-102