Parameter Control - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

4.2.7.3 Parameter Control

Don't use without indicate in this manual except for
C A U T I O N
[LIFCNTSET (80)], [CTLSET (85)], [LIFCNTR (D0)],
[LIFLIMR (D1)], [CTLSETR (D7)] and [LIFWNGR (F0)]
command.
Command/Status
With distinction column [C/S] of the following command/status,
make a command [C] and a status [S], show [command/status code]
+ [parameter code] in the command/status column and a command/
status code of that will be shown soon in 16.
NOTE: [V1-V4] is still the numerical value of 10, and shows count
accumulation value more than the high rank in order.
Table 4-35. Command/Status-Parameter Control
Name C/S Command/Status
LIFCNTSET C None
S 80, LIFE, V1, V2, V3, V4
LIFLIMSET C None
S 81, LIFE, V1, V2, V3, V4
CTLSET C None
S 85, CTL, V1, V2, V3
LIFWNGSET C None
S 88, LIFE, V1, V2, V3, V4
Chapter 4 Diagnostics
Name
LIFCNTR
LIFLIMR
CTLSETR
STCCNR
LIFWNGR
CRIDR
CRMDR
Explanation
-
Write data to life
counter
-
<Do not use unless
instructed to>
Change life limit
value
-
<Do not use unless
instructed to>
Change control
value
-
<Do not use unless
instructed to>
Change life warning
value
Table 4-35. Command/Status-Parameter Control
C/S Command/Status
C D0, LIFE
S D0, LIFE, V1, V2, V3, V4
C D1, LIFE
S D1, LIFE, V1, V2, V3, V4
, V5, V6, V7, V8
C D7, CTL
S D7, CTL, V1, V2, V3
C DB, STC
S DB, STC, V1, V2, V3
C F0, LIFE
S F0, LIFE, V1, V2, V3, V4
C F2
S F2, ID
C F3
S F3, V1, V2, V3, V4 , V5
, V6, V7
Revision C
Explanation
Read data of life
counter
Read life limit value
Read control value
Read statistical
counter value
Read life warning
value
Read CRUM ID
Read CRUM data
4-80