EPSON AcuLaser C8500
3.2.14.2 FUSER DRIVE ASSY (PL11.1.2) Removal
1. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
2. Remove the FUSER ASSY. (See Section 3.2.12.1.)
3. Remove the FUSER MOTOR ASSY. (See Section 3.2.14.3.)
4. Remove the LVPS. (See Section 3.2.16.1.)
5. Remove the KL clip securing the AUGER HIGH ASSY inside the printer.
6. Remove the 5 screws (silver, w/collar, 6mm) securing the FUSER DRIVE
ASSY, and remove the FUSER DRIVE ASSY.
C H E C K
Be careful not to pinch the harness when mounting.
P O I N T
Disassembly/Assembly/Adjustment
Disassembly/Assembly Procedures
Figure 3-108. FUSER DRIVE ASSY Removal
Revision C
3-94