EPSON AcuLaser C8500
3.2.17.3 CONT. CHASSIS ASSY (PL14.1.1) Removal
1. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)
2. Remove the RIGHT COVER ASSY. (See Section 3.2.5.11.)
3. Remove the MSI/REGI HIGH ASSY. (See Section 3.2.8.1.)
4. Remove the CONTROLLER PWB. (See Section 3.2.17.1.)
5. Remove the CONTROLLER FAN. (See Section 3.2.17.2.)
6. Remove the 9 screws (silver, w/collar, 6mm) securing the CONT.
CHASSIS ASSY, and remove the CONT. CHASSIS ASSY.
Figure 3-128. CONT. CHASSIS ASSY Removal
Disassembly/Assembly/Adjustment
Disassembly/Assembly Procedures
Revision C
3-110