Epson AcuLaser C8500 Service Manual page 489

EPSON AcuLaser C8500
9. IBT Belt: Shows the amount of the IBT Belt used. The
indicated value is the number of the IBT Belt
cycle (rotation times) after the "IBT Belt Clear" is
executed in the Maintenance Menu.
10. 2nd BTR Offset
Shows the offset value of the 2nd BTR transfer
Plain Paper 1 :
voltage for Plain Paper 1.
Shows the offset value of the 2nd BTR transfer
Transparency :
voltage for transparency.
Cover : Shows the offset value of the 2nd BTR transfer
voltage for the cover.
Coated Paper 1 : Shows the offset value of the 2nd BTR transfer
voltage for Coated Paper 1.
Card : Shows the offset value of the 2nd BTR transfer
voltage for the card.
Shows the offset value of the 2nd BTR transfer
Envelope :
voltage for the envelope.
Chapter 6 Maintenance
11. Engine Version
The value calculated from the engine side with
MCU :
the mechanism controller version in the printer.
Example: For Version 1.03.02,
Duplex: The value calculated from the engine side with
the mechanism controller version in the printer.
Example: For Version 0.1.29,
LCC: The value calculated from the engine side with
the mechanism controller version in the printer.
Example: For Version 0.1.27,
Revision C
the value is indicated as "010302".
the value is indicated as "000129".
the value is indicated as "000127".
6-10