Lithium Battery Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.17.4 Lithium Battery Removal

Before starting, be sure to turn the printer off and unplug
W A R N I N G
the power cable from the AC power socket.
When replacing the lithium battery with a new one, make
sure the new one meets the specifications.
(#CR2032 3V Lithium Cell Battery)
Danger of explosion if battery is incorrectly replaced.
Dispose of used batteries according to government's laws
and regulation.
Do not charge the lithium battery.
Avant de commencer, assurez vous que l'imprimante soit
W A R N I N G
eteinte et que le cordon d'alimentation soit debranche.
Lorsque vous changez la pile au lithium, assurez vous que
la nouvelle respecte bien les caracteristiques requises.
(#CR2032 3V la pile au lithium)
Lorque que vous installez la pile au lithium, faites
attention a l'inserer dans le bon sens en respectant la
polarite.
Veillez a jeter les piles usagees selon le reglement local.
Ne rechargez pas les piles au lithium.
1. Remove the RIGHT COVER ASSY. (See Section 3.2.5.11.)
2. Using a standard screwdriver, remove the lithium battery.
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Figure 3-129. Lithium Battery Removal
Revision C
Lithium Battery
3-111