Fuser Chute Fan (Pl9.4.10) Removal - Epson AcuLaser C8500 Service Manual

Color laser page printer

Hide thumbs Also See for AcuLaser C8500:

Table of Contents

EPSON AcuLaser C8500

3.2.12.19 FUSER CHUTE FAN (PL9.4.10) Removal

1. Remove the FUSER ASSY. (See Section 3.2.12.1.)

2. Remove the 2 screws securing the HORIZONTAL CHUTE (gold, tapping,

10mm). Lift and remove the HORIZONTAL CHUTE together with the

FUSER PAPER ASSY

3. Remove the 2 screws (gold, tapping, 10mm) securing the FUSER

BOTTOM COVER. Slide the FUSER BOTTOM COVER to the rear and

4. Remove the FUSER CHUTE FAN from the FUSER TRAY.

5. Disconnect the FUSER CHUTE FAN connector (P/J80).

Disassembly/Assembly/Adjustment

Figure 3-97. FUSER CHUTE FAN Removal

Disassembly/Assembly Procedures