Selectype Mode; Selectype Setting Menu List - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

1.6.1.2 SelecType mode

NOTE: SelecType mode is effective when the printer is free from any
error.
1. To enter the SelecType mode:
Do one of the following:
Press the SelecType button to enter the SelecType mode through the
One touch mode 1 and 2.
Press the Menu , Item, Value, or Enter button.
2. To change the setting, follow the steps below.
Step
1) Changing the setting menu
2) Changing the setting item
3) Changing the setting value
4) Changing the setting value
5) Enter the value (Executes the operation.)
6) To the next setting
*1: The trailing * means the current setting value.
*2: Using the Alt button + Menu/Item/Value button, it is
possible to cycle through the lists backward.
3. To exit the SelecType mode, do one of the following:
Press the On Line button.
Perform panel setting initialization.
Run a status sheet.
Press the SelecType button.
PRODUCT DESCRIPTIONS
Button
*1 Menu
*1 Item
*1
Value
*1 *2
Value
Enter
Menu

1.6.2 SelecType Setting Menu List

This section contains the tables which list the SelecType setting menus. The
factory defaults values are shown in Bold Italic style.
Test Menu
Item
Status Sheet
Network Status Sheet
*9, *14
AUX Status Sheet
*11
PS3 Status Sheet
*11
PS3 Font Sample
ESC/Page Font Sample
LJ4 Font Sample
ESCP2 Font Sample
FX Font Sample
I239X Font Sample
Emulation Menu
Item
Parallel
Network
*8
AUX
Printing Menu
Item
Paper Source
Page Size
Wide A4
Orientation
Out Bin
Panel Setting
Value
*13
*22
Value
Auto , LJ4, ESCP2, FX, I239X, PS3
Auto , LJ4, ESCP2, FX, I239X, PS3
Auto , LJ4, ESCP2, FX, I239X, PS3
Value
*5 *6
Auto , MP, LC1, LC2 , LC3 ,
*1 *2
A4 , A3, A5, B5, LT ,B, HLT, LGL, GLT, GLG, EXE,
F4, MON, C10, DL, C6, IB5, CTM, A3W
Off, On
Port, Land
Face-down, Face-Up
Revision C
*11
, GL2
*11
, GL2
*11
, GL2
1-39