Cartridge Sensor (Pl7.2.26) Removal - Epson AcuLaser C8500 Service Manual

Color laser page printer

Hide thumbs Also See for AcuLaser C8500:

Table of Contents

EPSON AcuLaser C8500

3.2.10.5 CARTRIDGE SENSOR (PL7.2.26) Removal

1. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)

2. Disconnect the CARTRIDGE SENSOR connector (P/J87) and FRONT

COVER SWITCH L connector (P/197), and free the harness by

disconnecting from the CART. SENSOR PLATE.

3. Remove the screw (gold, tapping, 8mm) securing the CART. SENSOR

ASSY and remove the CART. SENSOR ASSY.

4. Remove the screw (gold, tapping, 8mm) securing the CARTRIDGE

SENSOR and remove the CARTRIDGE SENSOR.

Securely hook the harness in the hooks of the USED

SENSOR PLATE and ROTARY LATCH ASSY so there is no

slack in the harness.

Disassembly/Assembly/Adjustment

Disassembly/Assembly Procedures

Figure 3-66. CARTRIDGE SENSOR Removal