Exit Tray Assy (Pl10.1.10) Removal; Exit Upper Assy (Pl10.1.2) Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.13.1 EXIT TRAY ASSY (PL10.1.10) Removal

1. Bend the rear hinge of the EXIT TRAY ASSY inward, remove the boss
from the FUSER TRAY, remove the front hinge, and remove the EXIT
TRAY ASSY.
C H E C K
Mount the EXIT TRAY ASSY so that the spring of the front
P O I N T
hinge touches the outside of the FUSER TRAY ASSY.
Figure 3-99. EXIT TRAY ASSY Removal
Disassembly/Assembly/Adjustment

3.2.13.2 EXIT UPPER ASSY (PL10.1.2) Removal

1. Open the EXIT UPPER ASSY.
NOTE: Be careful not to damage the hinges of the EXIT UPPER ASSY when
performing the following.
2. Bend the front hinges of the EXIT UPPER ASSY inward, remove the boss
from the front of the EXIT LOWER ASSY, and remove the hinge of the
EXIT UPPER ASSY. Then remove the rear hinge and remove the EXIT
UPPER ASSY.
Disassembly/Assembly Procedures
Figure 3-100. EXIT UPPER ASSY Removal
Revision C
3-89